Endpoint Block Plus Wrapper v1.10 and v1.10.1 for PCI Express - Importing a v1.8 XCO to v1.9 causes "Error:sim228 -An Invalid core configuration has been detected during Customization."
Description
Known Issue: v1.10, v1.9
When importing a v1.8, v1.7.1 or v1.6.1 XCO file into CORE Generator for generation of a v1.9 or v1.10 core, I might receive the following error:
Customizing IP...
ERROR:sim - Expansion_Rom_Scale: Invalid value 'Kilobytes'.
ERROR:sim - Expansion_Rom_Size: Invalid value '4'.
ERROR:sim:228 - An invalid core configuration has been detected during Customization. Core parameters will be reset to their default values.
Solution
This is due to the change made to remove the Expansion ROM disable feature. See (Xilinx Answer 31572) under the General Information section and CR 473951 in the Resolved Issues section.
To fix this, open the XCO file in a text editor. Replace the lines:
CSET expansion_rom_bar=00000000
CSET expansion_rom_enabled=false
with
CSET expansion_rom_bar=FFF00001
CSET expansion_rom_enabled=true
Release History
04/13/2009- Updated for ISE 11.1 and core version v1.10.
09/17/2008 - Initial Release.
Applies To
IP
- Virtex-5 Integrated Endpoint Block