We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 31900

10.1i ISE - After Project Navigator runs Xplorer, not all MAP and PAR options are set correctly for optimal run


When Xplorer completes, the correct options should be auto-populated within ISE. I notice that the following options are not set up correctly:

MAP options:

- Global Optimization

- Retiming

PAR options:

- Place & Route Effort Level (Overall)


These options need to be manually changed to the appropriate values within the Project Navigator Implementation properties.

Find the option settings by reading the MAP and PAR reports. To read which switches correspond to the appropriate option, please refer to the Development System Reference Guide:

AR# 31900
Date Created 05/29/2009
Last Updated 07/26/2010
Status Archive
Type General Article