We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 31990

LogiCORE OBSAI v2.1 - Setting N_LCV = 1 causes a compilation error in XST


The default value of N_LCV should be changed from 10 to 1, but setting N_LCV = 1 causes a compilation error in XST.


This issue has been fixed in the rev1 patch to the OBSAI v2.1 Core. The patch is available in (Xilinx Answer 30969).

AR# 31990
Date Created 12/12/2008
Last Updated 05/23/2014
Status Archive
Type General Article