We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 321

LCA2XNF 5.0: -w option erroneously produces netlist with no delay information


If LCA2XNF 5.0 is run with the -q or -r options in addition to the -w
option, the resulting netlist will not contain timing information. The
-w instructs LCA2XNF to write timing information into the netlist. The
-q and -r options, however, are used to create RPM netlist, as is done
by the HM2RPM program. Since RPM netlist should not contain timing
information, the -q and -r options will override the -w option.

AR# 321
Date Created 08/31/2007
Last Updated 03/31/1997
Status Archive