11.1 ChipScope Pro - Analyzer now automatically detects the buses in my design

AR#	32429	Search For Another Answer
Topic	SW-Chipscope Pro
Last Updated	04/25/2009
Status	Active

Description

Keywords: Logic, analyzer, JTAG, ILA, ICON

When I connect to my ILA core using the ChipScope Analyzer, the buses in my core are automatically detected.

Solution

This is an enhanced feature of the Analyzer and should detect all buses in the ILA Core. This can be disabled in the Analyzer by de-selecting the ?Auto-create Buses? check box in the JTAG Configuration dialog.