Main
Home  :  Support  :  Answers  :  11.1 ChipScope Pro IBERT - Generation fails at MAP for designs on Virtex-5 LX20T

11.1 ChipScope Pro IBERT - Generation fails at MAP for designs on Virtex-5 LX20T

AR# 32431

Search For Another Answer
Topic SW-ChipScope IBERT
Last Updated 04/16/2009
Status Active
Description

Keywords: GTP, GTX, MGT, SIOTK, serial, debug, BER

When I generate an IBERT design that targets an LX20T, it fails at MAP.

Solution

This issue will be resolved in ChipScope Pro IBERT 11.2. If you require a fix before this, please open a WebCase with Xilinx Customer Support at:
http://www.xilinx.com/support/clearexpress/websupport.htm

 
 
/csi/footer.htm