Main
Home  :  Support  :  Answers  :  11.1, 11.2 iMPACT - One Step SVF does not work on attached devices

11.1, 11.2 iMPACT - One Step SVF does not work on attached devices

AR# 32448

Search For Another Answer
Topic Config-iMPACT
Last Updated 06/09/2009
Status Active
Description

Keywords: JTAG, Indirect, ISP, XAPP058, BSCAN, Configuration

One Step SVF does not work on attached devices such as BPI or SPI flash, resulting in an error similar to the following:

"ERROR:Portability:90 - Command line error: Argument <pos> must be specified for the switch "-position""

Solution

This feature is scheduled to be added in iMPACT 12.1.

To work around this problem, use the normal SVF flow.
 
 
/csi/footer.htm