AR #32542 - 11.1 ISE - In Project Navigator, after switching from XST to Synplify for synthesis, the XST results are still used for implementation
11.1 ISE - In Project Navigator, after switching from XST to Synplify for synthesis, the XST results are still used for implementation
| AR# | 32542 |
| Part | SW-Project Navigator |
| Last Modified | 2009-04-23 00:00:00.0 |
| Status | Active |
| Keywords | synthesis, EDIF, NGC, cleanup, implementation, translate |
Description
Keywords: synthesis, EDIF, NGC, cleanup, implementation, translate
I Implement a design in Project Navigator with XST as the synthesis tool. Then, I change the synthesis tool to Synplify to compare results. When I run the design through, Synplify synthesis completes successfully, but when Project Navigator starts the translate process, NGDBuild uses the ".ngc" file previously generated by XST (rather than the ".edf" file from Synplify).
Solution
This issue will be fixed in the ISE 11.2 release.To compare the results in ISE 11.1, the ".ngc" file from XST needs to be temporarily re-named or moved before implementing with Synplify synthesis.