UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 32777

11.1 PlanAhead - Unable to run Tutorials with WebPack installation

Description

Keywords: Quick Front to Back, ChipScope, IO Pin Planning, RTL Development and Analysis, Design Analysis and Floorplanning, Using PlanAhead with Project Navigator

I am following one of the PlanAhead Tutorials, and I receive one of the following messages:

"ERROR:Xst:1817 - Invalid target device 'xc5vsx35t'"
"ERROR:Security:9 - No 'ISE' feature was available for part 'xc5vsx35t'."
"ERROR:Security:12 - No 'xc5vsx35t' feature was available (-5)."
"ERROR:Map:258 - A problem was encountered attempting to get the license for this architecture."

From the WebPACK Feature Summary, I can see that this device is not supported. How do I learn how to use PlanAhead and its features if I have a WebPACK license?

Solution

Most of the functionality covered in the PlanAhead Tutorials is also available through Video Demos. These can be accessed through the Videos and Webcasts section of the PlanAhead Page.

http://www.xilinx.com/tools/planahead.htm

If the videos are not sufficient to teach usage, you can also generate a 30-day evaluation license which will give you access to all devices from the Download Center.

http://www.xilinx.com/support/download/index.htm
AR# 32777
Date Created 06/02/2009
Last Updated 06/02/2009
Status Active
Type General Article