UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 32783

11.2 ChipScope Pro IBERT - "ERROR:sim - Error: map failed on chipscope_ibert. ERROR:Pack:1107..."

Description

Generation fails for my IBERT design and the following error message occurs in the Map report: 

 

ERROR:sim - Error: map failed on chipscope_ibert. ERROR:Pack:1107 - Unable to combine the following symbols into a single IOBError found during generation. 

 

How do I work around this issue?

Solution

This error occurs when you choose an incorrect pin location for the REFCLK input.  

 

To work around this issue, make sure you choose a valid I/O site and rerun your IBERT generation with the valid pin specified.

AR# 32783
Date Created 06/10/2009
Last Updated 09/04/2014
Status Active
Type General Article
IP
  • ChipScope Pro IBERT for 7 Series GTH
  • ChipScope Pro IBERT for 7 Series GTP
  • ChipScope Pro IBERT for 7 Series GTX
  • More
  • ChipScope Pro IBERT for 7 Series GTZ
  • ChipScope Pro IBERT for Kintex-7 GTX
  • ChipScope Pro IBERT for Spartan-6 GTP
  • ChipScope Pro IBERT for Virtex-7 GTX
  • ChipScope Pro IBERT for Virtex-6 GTX
  • ChipScope Pro IBERT for Virtex-6 GTH
  • ChipScope Pro IBERT for Virtex-5 GTX
  • Less