AR# 32839 MIG v3.1, Virtex-6 DDR2/DDR3 - Non-zero values for Additive Latency are not supported

Description
Solution

The MIG v3.1 tool allows selection of different Additive Latency values on the Memory Options screen. However, the DDR2 and DDR3 Virtex-6 MIG designs only support an Additive Latency value of 0.

Please ensure the Additive Latency selection in the MIG tool is set to 0. Non-zero values are not supported.

This optionis removed from the MIG tool in MIG 3.2.

Actions

Print

AR# 32839
Date Created	06/10/2009
Last Updated	12/15/2012
Status	Active
Type	General Article
Devices	Virtex-6 CXT Virtex-6 HXT Virtex-6 LX More Virtex-6 LXT Virtex-6 SXT Less
IP	MIG

Feed Back

All Programmable Technologies and Devices

New Connectivity Kit for High-Bandwidth and High-Performance Applications

Mobile Access for Forums

Kintex-7 FPGA KC705 Evaluation Kit

All Programmable Technologies and Devices

AR# 32839 MIG v3.1, Virtex-6 DDR2/DDR3 - Non-zero values for Additive Latency are not supported

Description

Solution

Actions