11.2/11.3/11.4 iMPACT - When I use the "Verify" option on a Spartan-6 or Virtex-6 device, DONE does not go High

AR#	32853	Search For Another Answer
Topic	iMPACT and Cables
Last Updated	01/05/2010
Status	Active

Description

When I use the "Verify" option on a Spartan-6 device, DONE does not go High. Programming reports as successful, but the device does not start up.  

 

What is causing this problem?

Solution

To work around this issue, uncheck the Verify option in the Programming Properties dialog. If required, you can use the stand alone verify option in the operations menu after programming.