We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 32862

Virtex-6 - Known Issues for Lower Power Virtex-6 -1L device


The Virtex-6 Lower Power (Virtex-6 -1L) device is supported in ISE Design Suite 11.2, but IP and third-party software support is limited.


ISE Design Suite 11.2 supports and allows users to target Virtex-6 FPGA Lower Power devices. 
At this time, there is limited IP support and no third-party synthesis tool support for these devices.  
For details on which IP are supported for the 11.2 release of ISE Design Suite, see the IP Release Notes Guide at: 
If Virtex-6 Lower Power device support is required, as a work-around, you can target Virtex-6 -1 devices in the synthesis tool and CORE Generator first, then re-target to Lower Power (-1L) devices during design simulation, implementation, and Power Estimator/Analyzer.
AR# 32862
Date Created 06/09/2009
Last Updated 05/23/2014
Status Archive
Type General Article
  • Virtex-6 CXT
  • Virtex-6 HXT
  • Virtex-6 LX
  • More
  • Virtex-6 LXT
  • Virtex-6 SXT
  • Less
  • ISE Design Suite - 11.2