11 EDK - XMD does not disassemble MicroBlaze floating point instructions correctly

AR#	33002	Search For Another Answer
Topic	EDK-xmd
Last Updated	08/06/2009
Status	Active

Description

Keywords: microprocessor, debug, float, point, unit

When I use XMD's "dis" command, I notice that XMD does not use the proper mnemonic for the floating point operations.

Solution

The problem is visual only, as the proper instructions exist in memory.

This problem has been fixed in EDK 11.3, available at:
http://www.xilinx.com/support/download/index.htm