We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 33036

CORE Generator - The full path to "Recent Projects" is not shown in the CORE Generator software


In the CORE Generator software, if you select File -> Recent Projects, a list of the most recently used projects is displayed. In CORE Generator 11.1 and later versions, the project name is shown with a truncated path (rather than the complete absolute path to the project).

I would prefer to see the full path to distinguish projects in a similar base directory structure. How can this be done?


The full path to these projects can be viewed in the status bar at the lower left corner of the CORE Generator interface when you hover over (mouse over) the shortened path.
AR# 33036
Date 05/23/2014
Status Archive
Type General Article
  • ISE Design Suite - 11.1
  • ISE Design Suite - 11.2
  • ISE Design Suite - 11.3
  • More
  • ISE Design Suite - 11.4
  • ISE Design Suite - 11.5
  • ISE Design Suite - 12.1
  • Less
Page Bookmarked