We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 33041

11.1/11.2 ChipScope Pro - The Analyzer GUI hangs when I try to "Save Project"


After connecting to the board and using the IBERT console, when I attempt to "Save Project" the GUI hangs and the Analyzer process needs to be killed. How do I work around this issue?


This error occurs if the Programming Cable is closed before the "Save Project" is attempted. When the "Save Project" option is used, the Analyzer polls the core for its current status. If the cable is closed the process hangs.

To work around this problem, ensure the cable is still open and connected when attempting to "Save Project".

This issue is scheduled to be resolved in ChipScope Pro 11.3

AR# 33041
Date Created 06/24/2009
Last Updated 12/15/2012
Status Active
Type General Article