We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 33124

Spartan-6 and Virtex-6 FPGA - General ES Patch for customers using ISE 11.2 Design Suite


The General ES Spartan-6 and Virtex-6 FPGA errata point to a patch of the ISE 11.2 Design Suite software. Newer ISEDesign Suite versions are now available, so please installan update. The patch information has been removed from this page since it is no longer applicable.


There is no longer a patch required for Virtex-6 or Spartan-6 FPGA. All issues which were addressed in the patch for ISE 11.2 are resolved in the ISE 11.3 software installation. Many other improvements and fixes are also included for Virtex-6 and Spartan-6 FPGA, so it is highly recommended to re-implement your 11.2 design in ISE 11.3 or later software version.

Important Update: There is a known issue with the Spartan-6 FPGA patch that causes EDK to return a Fatal Error when opening a Spartan-6 FPGA project.For more information and the solution, see (Xilinx Answer 33505).
AR# 33124
Date Created 07/16/2009
Last Updated 05/19/2012
Status Active
Type Known Issues
  • Spartan-6 LX
  • Spartan-6 LXT
  • Virtex-6 CXT
  • More
  • Virtex-6 HXT
  • Virtex-6 LX
  • Virtex-6 LXT
  • Virtex-6 SXT
  • Less