We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 33154

PlanAhead 11.2 - Incorrect WASSO information for the XC3S50AVQ100


The VQ100 package of the XC3S50A has 1 equivalent VCCO/GND pairs per bank according to the data sheet, but when I run WASSO on my design targeting that device, it lists 2 equivalent VCCO/GND pairs per bank for Banks 0 and 2. Which is correct?


The data sheet is correct and PlanAhead is incorrect.

AR# 33154
Date Created 07/20/2009
Last Updated 12/15/2012
Status Active
Type General Article