We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 33236

10.1 ISE Simulator (ISim) - Signals added to a testbench are not automatically added to the waveform


I have updated my testbench with new signals. However, when I launch ISE Simulator, the waveform does not automatically display the new signals.

How can I fix this issue?


This is a known issue with the ISE 10.1 tools and it has been fixed in ISE Design Suite 11.1.

Please download and install the latest ISE Design Suite version from the Download Center at: http://www.xilinx.com/support/download/index.htm

Linked Answer Records

Associated Answer Records

Answer Number Answer Title Version Found Version Resolved
33381 ISE Design Suite 11 - ISE Simulator (ISim) Known Issues N/A N/A
AR# 33236
Date Created 08/04/2009
Last Updated 12/15/2012
Status Active
Type General Article