Main
Home  :  Support  :  Answers  :  11.2, 11.3 ChipScope Pro Analyzer IBERT - Moving the sampling point slider sets EYE_SCAN_MODE attribute auto to manual

11.2, 11.3 ChipScope Pro Analyzer IBERT - Moving the sampling point slider sets EYE_SCAN_MODE attribute auto to manual

AR# 33242

Search For Another Answer
Topic SW-ChipScope IBERT
Last Updated 09/08/2009
Status Active
Description

Keywords: Virtex-6, MGT, GTX, SIOTK, analyzer

Moving the sampling point slider sets EYE_SCAN_MODE attribute auto to manual scan; the setting then cannot be reset to auto.

How do I maintain auto scan in this situation?

Solution

To work around this issue, you can manually change the EYE_SCAN_MODE attribute in the DRP tab.
 
 
/csi/footer.htm