UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 33341

11.3 EDK - ERROR:EDK - Error calling proc < ... >: can't read "strMainClkPortName": no such variable

Description

When I am building an EDK system with Base System Builder (BSB) that includes dual PowerPC 440 cores with the MPMC attached to one of the processors, I receive the following error message when I enter the Peripheral Configuration page in BSB:

ERROR:EDK - Error calling proc

<CoreModel::ClockRequirements::get_possible_frequencies_for_port>: can't read

"strMainClkPortName": no such variable

Solution

This error message is visual only and does not impact the design.

This problem has been fixed in EDK 11.4, available at:

http://www.xilinx.com/support/download/index.htm

AR# 33341
Date Created 08/26/2009
Last Updated 12/15/2012
Status Active
Type General Article