We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 33349

Virtex-5 System Monitor - I cannot find the SysMon Wizard in ISE Design Suite 11.2


Where can I find the System Monitor Wizard in ISE Design Suite 11.2?

Why is the System Monitor Wizard Listed as Superseded?


The System Monitor core can be found under the FPGA Features and Design (see Figure 1). However, to be able to view the System Monitor folder in the section, you need to check the "All IP Versions" box:

Figure 1. System Monitor Wizard in CORE Generator
Figure 1. System Monitor Wizard in CORE Generator

The System Monitor Wizard 1.0 is listed as "Superseded". This is incorrect as this is the only version of the Wizard currently available and is the correct one to use.

The new version of the Wizard will be available in 12.1.

AR# 33349
Date Created 11/12/2009
Last Updated 12/15/2012
Status Active
Type General Article
  • ISE Design Suite - 11.2
  • ISE Design Suite - 11.3
  • ISE Design Suite - 11.4
  • ISE Design Suite - 11.5
  • System Monitor Wizard