33374

I am unable to modify the Number of FSL links and Select Processor Local Bus (PLB) Interface parameters when I select the IP Configuration for the MicroBlaze processor on the Interrupt and Reset tab.

How can I resolve this problem?

The Number of FSL Links and Select Processor Local Bus (PLB) Interface parameters are visible on the Interrupt and Reset tab by mistake, and are found on the Buses tab. This problem is only visual and is fixed in 11.4.

This problem has been fixed in EDK 11.4, available at:

http://www.xilinx.com/support/download/index.htm

AR# 33374
Date Created	09/02/2009
Last Updated	12/15/2012
Status	Active
Type	General Article

AR# 33374 11.3 EDK - Why am I unable to change the Number of FSL Links and Select PLB Interface parameters on the Interrupt and Reset tab for the MicroBlaze processor?

Description

Solution

Actions

All Programmable Technologies and Devices

New Connectivity Kit for High-Bandwidth and High-Performance Applications

Mobile Access for Forums

Kintex-7 FPGA KC705 Evaluation Kit

All Programmable Technologies and Devices

AR# 33374 11.3 EDK - Why am I unable to change the Number of FSL Links and Select PLB Interface parameters on the Interrupt and Reset tab for the MicroBlaze processor?

Description

Solution

Actions