Main
Home  :  Support  :  Answers  :  MIG v3.2, Virtex-4/Virtex-5 FPGA DDR/DDR2 - MIG GUI incorrectly enables Data Mask checkbox for X4 RDIMM parts which do not have a DM

MIG v3.2, Virtex-4/Virtex-5 FPGA DDR/DDR2 - MIG GUI incorrectly enables Data Mask checkbox for X4 RDIMM parts which do not have a DM

AR# 33414

Search For Another Answer
Topic MIG
Last Updated 06/15/2011
Status Active
Description

MIG v3.2 incorrectly enables the Data Mask selection for x4 RDIMM devices. These parts do no have a data mask, therefore, the selection in the GUI should be disabled and not editable. This occurs for both Virtex-4 and Virtex-5 FPGA DDR/DDR2 designs.

Solution

Unless the user disables the Data Mask selection, the tool remains stuck on the bank selection page. To work around this issue, deselect/disable the Data Mask option and complete the core generation.

This issue is resolved in MIG v3.3 and released with ISE Design Suite 11.4.
Applies To

Devices

  • Virtex-4 FX
  • Virtex-4 LX
  • Virtex-4 QPro/R
  • Virtex-4 SX
  • Virtex-4Q
  • Virtex-4QV
  • Virtex-5 FXT
  • Virtex-5 LX
  • Virtex-5 LXT
  • Virtex-5 SXT
  • Virtex-5 TXT
  • Virtex-5Q
  • Virtex-5QV

IP

  • MIG
 
 
/csi/footer.htm