UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 33455

SPI-4.2 Lite v5.1 - "ERROR:LIT:554 - OBUFTDS symbol..."

Description

Any SPI-4.2 Lite v5.1 core generated for Spartan-6 FPGA and used in ISE 11.3/11.4 software will return the following error in Map:

ERROR:LIT:554 - OBUFTDS symbol

"core_pl4_lite_src_top0/U0/pl4_lite_src_io0/src_ddr[4].seto0.one_bit0/ddr0_bu

f" (output signal=TDat_P(4)) has its I input pin driven by an ODDR2 that is

using its D1 input. However, no ODDR2 was found driving the corresponding T

input pin. This will cause the design to not work in hardware. Please ensure

that OBUFTDS symbol

"core_pl4_lite_src_top0/U0/pl4_lite_src_io0/src_ddr[4].seto0.one_bit0/ddr0_bu

f" (output signal=TDat_P(4)) has its T input pin driven by an ODDR2.

Solution

A patch for this issue is available.

The SPI-4.2 Lite v5.1 Rev1 patch can be downloaded at:

http://www.xilinx.com/txpatches/pub/swhelp/ise11_updates/33455_spi42_lite_v5_1_rev1.zip

Installation Instructions

You must take the following steps to install the SPI-4.2 Lite v5.1 Rev1 patch:

1. Prior to installing the update, you must install ISE 11.3/11.4. Software downloads can be found here:

http://www.xilinx.com/support/download/index.htm

2. Unzip the patch ZIP archive to your Xilinx installation directory as pointed to by your XILINX path variable. The archive will ask whether to overwrite the existing files; select "Yes to All" and allow it to overwrite these files.

Revision History

09/16/2009 - Initial Release

AR# 33455
Date Created 09/09/2009
Last Updated 12/15/2012
Status Active
Type General Article