UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 33476

ISE Simulator (ISim) - Does ISE Simulator support third-party ".do" files?

Description

Does ISE Simulator support third-party ".do" files?

Is there a way to convert third-party ".do" files to ISim batch files?

Solution

ISE Simulator no longer supports third-party ".do" files. However, you can create an equivalent ISim batch file by looking up the equivalent ISim commands. Refer to the section "Third-Party Command Equivalency" in the ISim User Guide:
http://www.xilinx.com/support/documentation/sw_manuals/xilinx13_4/plugin_ism.pdf

Wave "do" files from third-party simulators cannot be read into ISE Simulator. It is necessary to create a WCFG file from an ISE Simulator simulation.

AR# 33476
Date Created 09/10/2009
Last Updated 12/15/2012
Status Active
Type General Article