UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 33581

LogiCORE Image Processing Pipeline v1.0 - Why is the output simulation netlist for my design encrypted, and only readable by ISE Simulator?

Description

Why is the output simulation netlist for my design encrypted, and only readable by ISE Simulator?

I cannot use ModelSim to simulate the Image Processing Pipeline, Gamma Correction, Color Correction Matrix, Color Filter Array Interpolation, or Defective Pixel Correction cores in 11.1, 11.2, or 11.3. Why is that?

Solution

This issue is fixed in 11.4.

This is a known bug in the generation process for the Image Processing Pipeline, Gamma Correction, Color Correction Matrix, Color Filter Array Interpolation, or Defective Pixel Correction cores in 11.1, 11.2, or 11.3.

The problem affects all stages of simulation, from Behavioral to Post Par Simulation.

You can work around this by using the ISE Simulator, which can read these encrypted netlists.

See (Xilinx Answer 32136) for a detailed list of LogiCORE Image Processing Pipeline Release Notes and Known Issues.

See (Xilinx Answer 32132) for a detailed list of LogiCORE IP Color Correction Matrix Release Notes and Known Issues.

See (Xilinx Answer 32133) for a detailed list of LogiCORE IP Color Filter Array Interpolation Release Notes and Known Issues.

See (Xilinx Answer 32134) for a detailed list of LogiCORE IP Defective Pixel Correction Release Notes and Known Issues.

See (Xilinx Answer 32135) for a detailed list of LogiCORE IP Gamma Correction Release Notes and Known Issues.

Linked Answer Records

Associated Answer Records

AR# 33581
Date Created 09/28/2009
Last Updated 12/15/2012
Status Active
Type General Article