Main
Home  :  Support  :  Answers  :  11.x ChipScope Pro - "csejtag - The application failed to start because libCseCore.dll was not found. Re-installing the application may fix this problem."

11.x ChipScope Pro - "csejtag - The application failed to start because libCseCore.dll was not found. Re-installing the application may fix this problem."

AR# 33599

Search For Another Answer
Topic SW-Chipscope Pro
Last Updated 10/05/2009
Status Active
Description

Keywords: TCL, script, VIO, cse, crash, Windows, NT, JTAG, configuration CSP

When I attempt to run some TCL commands using the ChipScope TCL engine, an error message appears:

Pop-up
Pop-up


How do I work around this issue?

Solution

You do not need to re-install. This issue is usually related to how your environment is setup.

Ensure that your %XILINX% and %CHIPSCOPE% environment variables point to a valid install.

Also, ensure that they are correctly set in your %PATH% and %LD_LIBRARY_PATH% environment variables.

For further information on setting up these variables, refer to the "Troubleshooting Guide" section of the ChipScope Pro Software and Cores User Guide:
http://www.xilinx.com/support/documentation/dt_chipscopepro_chipscope11-1.htm
 
 
/csi/footer.htm