Spartan-6 FPGA - How should I connect the RFUSE pin when eFUSE is not used?

AR#	33622	Search For Another Answer
Topic	Configuration
Last Updated	08/04/2010
Status	Active

Description

How should I connect the RFUSE input pin on the Spartan-6 device when eFUSE is not used?

Solution

Please see the following documentation for this information: 

- Spartan-6 FPGA Packaging and Pinouts, Advance Product Specification (UG385) 

These can be found at the following link: 

http://www.xilinx.com/support/documentation/spartan-6.htm