11.3 BitGen - The TIMER value setting does not work

AR#	33752	Search For Another Answer
Topic	SW-Bitgen
Last Updated	11/04/2009
Status	Active

Description

Keywords: PN, TIMER_CFG, TIMER_USR, bgn, Virtex-5, Virtex-6, Spartan-6, 11.2, 11.1

In the ISE Project Navigator GUI, I specify the watch dog timer value, but I see the timer value in the BIT file remains as default. I cannot even find -g timer_cfg or timer_usr command in the BGN file.

Solution

To work around this issue, run BitGen command line with the -g timer_cfg:<hex value> or -g timer_usr:<hex value> options.

This issue is scheduled to be fixed in BitGen 11.4.