We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 33752

11.3 BitGen - The TIMER value setting does not work


In the ISE Project Navigator GUI, I specify the watch dog timer value, but I see the timer value in the BIT file remains as default. I cannot even find -g timer_cfg or timer_usr command in the BGN file.


To work around this issue, run BitGen command line with the -g timer_cfg:<hex value> or -g timer_usr:<hex value> options.

This issue is scheduled to be fixed in BitGen 11.4.

AR# 33752
Date 12/15/2012
Status Active
Type General Article
Page Bookmarked