We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 33755

11.x ChipScope Pro Inserter - Spartan-6 is shown as the device family when the project is Automotive or Low Power Spartan-6 FPGA


When I run the ChipScope Pro inserter on an Automotive Spartan-6 device (aspartan6) or Low Power Spartan-6 device (spartan6l) project, it always reports the device family as Spartan-6.  


Will my cores work? How do I work around this issue?


This issue can be safely ignored. These devices are the same from a functional point of view and the ChipScope cores for all 3 are identical.

Linked Answer Records

Associated Answer Records

Answer Number Answer Title Version Found Version Resolved
32651 Spartan-6 - ISE Software 11 Update Known Issues related to Spartan-6 FPGA N/A N/A
AR# 33755
Date Created 11/04/2009
Last Updated 05/23/2014
Status Archive
Type General Article