We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Page Bookmarked

AR# 33795

LogiCORE IP Ten Gigabit Ethernet PCS/PMA (10GBASE-R) v1.1 - Failures occur when running NCSIM Verilog simulation


If I run a Verilog NCSIM simulation, errors occur when I compile the v6gth_wrapper_gth_init.v wrapper file from the GTH Wizard. The errors are similiar to the following:

"ncvlog: *E,NGITEM (../../example_design/v6gth_wrapper_gth_init.v,142|14): Not a valid generate item: 'parameter_declaration' [12.1.3(IEEE 2001)].

parameter [3:0] TXPOWERDOWN = 4'b0001;"


To work around this issue, replace all occurrences of "parameter" with "localparamin" in the example_design/v6gth_wrapper_gth_init.v file.

For example, change:

parameter [3:0] TXPOWERDOWN = 4'b0001;


localparam [3:0] TXPOWERDOWN = 4'b0001;

AR# 33795
Date 05/23/2014
Status Archive
Type General Article