UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 33921

ChipScope Pro tool - Inserter - When I run the Inserter command line, it brings up the interface and will not let me change the Part

Description

When I run the Inserter command line, it brings up the interface and will not let me change the Part. How do I run ChipScope inserter command line?

Solution

This will occur when you pass an incorrect argument to the inserter. For example, an incorrect part name. For example - 

 

"5vlx110tff1738-2" - Fail 

"xc5vlx110t-ff1738-2" - Pass 

 

To get the exact command line, try an initial run of Inserter from the ISE software interface. The correct syntax will appear in the console and you can use this.

AR# 33921
Date Created 12/03/2009
Last Updated 05/23/2014
Status Archive
Type General Article