We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 3401

Workview Office - Path to LogiBLOX under tools menu is incorrect on Windows NT


Keywords: custmenu, logiblox, lbgui, NT, 7.4, ViewDraw, Tools

Urgency: Standard

General Description:
After running the command:

custmenu %XILINX%\viewlog\data\viewblox.txt

two new commands appear under the Tools menu in ViewDraw.
Tools -> Add LogiBLOX
Tools -> Change LogiBLOX

With Workview Office 7.4 and Windows NT 4.0, the paths for these executables
may be incorrect. When selecting either program, an error occurs:

The command c:\wvoffice\viewblox.exe does not exist, check path


viewblox.exe exists in the Xilinx executable area, not Workview Office.

To fix this error, select Tools -> Customize.

Under the User menu, select Add &LogiBLOX.

Edit the Command field, removing the path to the Workview Office directory,
leaving just "viewblox.exe".

Because %XILINX%\bin\nt is in your path, this executable will be found.
Repeat for Change L&ogiBLOX, then select OK.
AR# 3401
Date Created 08/31/2007
Last Updated 05/22/2006
Status Archive