We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 34112

2014.4 Vivado Power - Junction Temperature differences between report_power and XPE


Why do XPE and report_power have a different calculated Junction Temperature for the same setting and device?


This value depends on the total Dynamic and Quiescent power numbers.

Because these numbers are different in report_power and XPE, you will see a difference between the two.

AR# 34112
Date Created 01/12/2010
Last Updated 01/23/2015
Status Active
Type General Article
  • Vivado Design Suite - 2014.4
  • Vivado Design Suite - 2014.3
  • Vivado Design Suite - 2014.1
  • Vivado Design Suite - 2014.2