UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 34192

Virtex-6 GTX Transceiver Wizard - Oversampling rate update for production silicon

Description

Some versions of the Virtex-6 FPGA GTX Transceiver Wizard allow the user to generate wrappers for line rates that are below the range supported by production devices. This Answer Record describes how to identify and correct those designs.

Solution

The lowest line rate supported by the Virtex-6 FPGA GTX with oversampling is 480 Mb/s.The /2 and /4 output dividers that can be used when not using oversampling cannot be used with oversampling.If a line rate below the supported rate is required, implementations similar toone of the following Application Notes might be helpful:

Linked Answer Records

Associated Answer Records

AR# 34192
Date Created 02/01/2010
Last Updated 08/30/2012
Status Active
Type General Article
Devices
  • Virtex-6 CXT
  • Virtex-6 LXT
  • Virtex-6 SXT
IP
  • Virtex-6 FPGA GTX Transceiver Wizard