We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 34305

11.x Map - Portability:90 - Command line error: Switch "-t" is excluded or already used


I would like to change the cost table for Map by adding "-t 40" in the "Other Command Line Options"Map property in Project Navigator. However, when I do so, I obtain this error:
ERROR:Portability:90 - Command line error: Switch "-t" is excluded or already used

How can I resolve this issue?


This error occurs because the cost table switch is already used in ISE's Map command line. Currently, Map does not allow multiple cost table (-t) switches.

To resolve this issue, set the desired starting cost table by changing the value of the "Starting Placer Cost Table" property in the Map process properties.

AR# 34305
Date Created 02/04/2010
Last Updated 12/15/2012
Status Active
Type General Article
  • ISE - 10.1
  • ISE Design Suite - 11.1
  • ISE Design Suite - 11.2
  • More
  • ISE Design Suite - 11.3
  • ISE Design Suite - 11.4
  • ISE Design Suite - 11.5
  • ISE Design Suite - 12.1
  • ISE Design Suite - 12.2
  • Less