UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 34357

11.x ISE - "ProjectMgmt:387 - TOE: ITCLInterp:ExecuteCmd gave Tcl result: 'error copying "/files/top.ncd" to "/files/top.ncd": not owner'"

Description

I am using ISE Design Suite on a vfat partition. When I run "Implement Design", I encounter the following error:

"ProjectMgmt:387 - TOE: ITCLInterp:ExecuteCmd gave Tcl result: 'error copying "/mnt/files/fpga/DemodBslineBuild/dfpga_bsline.ncd" to "/mnt/files/fpga/DemodBslineBuild/dfpga_bsline_guide.ncd": not owner'"

How can I resolve this issue?

Solution

This issue might occur if the vfat partition sets 'root' as the only owner for the partition.

To work around this issue, some customers have used the 'owner' parameters of the UNIX mount command to allow write permissions to user accounts. For example, the following mount parameters in the /etc/fstab file resolve the issue for a user reporting this error:

/dev/sda8 /mnt/files vfat users,owner,rw,exec,umask=000 0 0

Ifthis resolution does not solve the problem, please contact Xilinx Technical Support.

AR# 34357
Date Created 02/09/2010
Last Updated 12/15/2012
Status Active
Type General Article
Tools
  • ISE Design Suite - 11.1
  • ISE Design Suite - 11.2
  • ISE Design Suite - 11.3
  • ISE Design Suite - 11.4