UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 34391

MIG Virtex-6 DDR2/DDR3 - Frequency Support

Description

This section of the MIG Design Assistant focuses on Frequency Support for Virtex-6 DDR3/DDR2 designs. Below, you will find information related to your specific question.

Note: This Answer Record is a part of the Xilinx MIG Solution Center (Xilinx Answer 34243). The Xilinx MIG Solution Center is available to address all questions related to MIG. Whether you are starting a new design with MIG or troubleshooting a problem, use the MIG Solution Center to guide you to the right information.

Solution

For a complete list of frequency support for Virtex-6 DDR3/DDR2 designs please refer to the"Virtex-6 FPGA Memory Interface Solutions Data Sheet" DS186:

http://www.xilinx.com/support/documentation/ip_documentation/ds186.pdf

In this list you'll find the supported frequency ranges for each speed grade device, and type of supported memory.
For information on usage of Inner Columns for Address/Control Group for MIG Virtex-6 DDR3/DDR2 design, please see:

(Xilinx Answer 34317)- Usage of Inner Columns for Address/Control Group

For information on usage of Inner/Outer Columns for Data Group for MIG Virtex-6 DDR3/DDR2 design, please see:
(Xilinx Answer 34390)- Usage of Inner/Outer Columns for Data Group

Linked Answer Records

Associated Answer Records

AR# 34391
Date Created 05/24/2010
Last Updated 12/15/2012
Status Active
Type General Article
Devices
  • Virtex-6 CXT
  • Virtex-6 HXT
  • Virtex-6 LX
  • More
  • Virtex-6 LXT
  • Virtex-6 SXT
  • Less
IP
  • MIG