UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 34560

PlanAhead - How can I change the I/O Standard of a bus of pins?

Description

How can I change the I/O Standard of a bus of pins, rather than changing individual pins one at a time?

Solution


To change the I/O Standard of a bus of pins, right-click on the bus in the "I/O Ports" window and select "Configure I/O Ports...".


 

This allows you to set I/O standard, drive strength, slew type and pull type.



This changes the I/O Standard of all of the pins in the bus at once.
AR# 34560
Date Created 03/03/2010
Last Updated 09/30/2014
Status Active
Type General Article
Devices
  • FPGA Device Families
Tools
  • PlanAhead