AR# 34658 XPS_LL_TEMAC and changing PHY TYPE parameter
Description
When Iuse the xps_ll_temac in one mode (MII, GMII, RGMII v1.3, RGMII v2.0, SGMII, or 1000Base-X) and I change to another mode, the top level ports in the MHS are left while the ports in the MHS from the xps_ll_temac are deleted.
Solution
When you change from one TEMAC_TYPE to another, you need to remove all the associated TEMAC ports from the MHS top level that are not part of the mode being used.
The signals for each C_TEMAC_TYPE (MII, GMII, RGMII v1.3, RGMII v2.0, SGMII, or 1000Base-X) are in the xps_ll_temac data sheet.
$XILINX\EDK\hw\XilinxProcessorIPLib\pcores\xps_ll_temac_v*\doc\
Also, the UCF file needs to be updated with the chosen mode, see (Xilinx Answer 32713).
Linked Answer Records
Master Answer Records
| Answer Number | Answer Title | Version Found | Version Resolved |
|---|---|---|---|
| 34609 | 12.x EDK - Master Answer Record List | N/A | N/A |
Actions
Feed Back