We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 34704

Spartan-6 - Use of the PLL DRP will result in Post Config CRC errors


When I use the PLL DRP in my Spartan-6 FPGA design, I see errors in the Post Config CRC check. Why is this? Can I use the Post Config CRC and PLL DRP together?


Use of the PLL DRP is not masked; therefore, any change to the PLL results in a CRC error. Pausing the CRC check during DRP writes will not work around this as the values will still be checked and the next CRC check will not match the golden CRC value.
AR# 34704
Date 03/11/2010
Status Active
Type General Article
  • Spartan-6 LX
  • Spartan-6 LXT
Page Bookmarked