UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 34786

Project Navigator - Where did the Asynchronous Reports, PAR sub-process go?

Description

In ISE 10.xi software, there was a sub-processunder Place & Routenamed 'Asynchronous Reports'. Where did this process go, or how can I get to it?

Solution

In ISE 11.1 software and later the generation of Asynchronous reports iscontrolled by a Place and Rout process property. Right-click on Place & Route in the Processes window and select Process Properties. In the Process properties window, select the check box next to "Generate Asynchronous Reports" toenable theAsynchronous Delay Report generation.

To display the report, open up the Design Summary from the Processes window, right-clickon the reports pane and select Show/Hide Reports. Enable Asynchronous DelayReport in the Secondary Reports section.
AR# 34786
Date Created 05/06/2010
Last Updated 12/15/2012
Status Active
Type General Article