Spartan-6 Block RAM - 9Kb Block RAM SRVAL/INIT Values Incorrect for Parity Bits
Description
SRVAL and INIT values may not be properly set for the 9K Block RAM parity bits.
Solution
Description:
The parity bits SRVAL and INIT values are not being set properly for Spartan-6 FPGA 9k Block RAM when the DATA_WIDTH = 9.
Affected components:
RAMB8BWER when the DATA_WIDTH is set to 9
Software Behavior:
- Behavior in ISE Design Suite 11.5 and earlier: The parity bit in 9-bit mode may have incorrect SRVAL and/or INIT programmed.
- Behavior in ISE Design Suite 12.1 and later: This will be fixed in this version of software. SRVAL and INIT values will be properly set.
Workaround:
There is no workaround at this time.
Applies To
Devices
- Spartan-6 LX
- Spartan-6 LXT
Design Tools
- ISE Design Suite - 11.1
- ISE Design Suite - 11.2
- ISE Design Suite - 11.3
- ISE Design Suite - 11.4
- ISE Design Suite - 11.5