UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 3499

M1.4 PAR: ERROR: x45dr - netcheck: / Warning: basrt

Description

Keywords: x45dr, PAR, 1.4, basrt, EC, pin, unroute

Urgency: Standard

General Description: Following error/warnings occur when
trying to run a design through M1.4 that uses the OMUX in
the IOB and also makes use of the GND availble at the EC
pin in the IOB to drive the OMUX.

ERROR:x45dr - netcheck: Signal BUF0/USClk3/lastClkEn is routed to the O pin of
block sClkOut<3> on routing which is not available because the EC pin is
using the Logic Zero option. Re-route the connection to the O pin without
using the wire shared with the EC pin.
WARNING:basrt - Error found on signal: BUF0/USClk3/lastClkEn, leaving it
unrouted.

Solution

This problem is fixed in the latest M1.4 Core Tools Update
available on the Xilinx Download Area:

Solaris: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_sol17_m14.tar.Z
SunOS http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_sun17_m14.tar.Z
HPUX: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_hp17_m14.tar.Z
Win95/NT: http://www.xilinx.com/txpatches/pub/swhelp/M1.4_alliance/core_nt17.zip
AR# 3499
Date Created 08/31/2007
Last Updated 10/20/2008
Status Archive
Type General Article