We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 35294

12.1 CORE Generator - IP core name validity check fails: "Validation Failed:"


After selecting Generate, CORE Generator issues a pop-up dialog box that says "Coregen parameter validation... Validation Failed:"


This validation error will occur with certain IP if the selected Component Name is identical to the internal module name.

Example: The Component name of "c_addsub_v11_0" is used for the Adder Subtracter v11.0 IP.

The pop-up just says "Validation Failed:"  The message Component name cannot be the same as the module name (which is printed out in the debug logs).

It should also highlight the component name in red to show which value failed validation.

AR# 35294
Date Created 04/26/2010
Last Updated 05/23/2014
Status Archive
Type General Article
  • ISE Design Suite - 12.1