UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 35392

12.1 CORE Generator - Generating a MIG core fails from Project Navigator

Description

I attempted to create a MIGv3.4 IP core using the Project -> New Source process, but the core generation failed without giving an explanation.

Solution

We observed in some cases that the generation ofa MIG 3.4 IP core will fail when generated from Project Navigator if an Add/Subtract IP core is generated first. Repeated attempts to generate a MIG IP core will fail as long as the current Project Navigator session is used.

To create the MIG IP core successfully, a user should close and reopen the Project Navigator Software.

AR# 35392
Date Created 04/26/2010
Last Updated 12/15/2012
Status Active
Type General Article
Tools
  • ISE Design Suite - 12.1