We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 35503

Project Navigator - Creating a new project causes a fatal error


I attempt to create a new project using File ->New Project. Afterentering the desired information in the NewProject dialog box, I select OK and Project Navigator issuesa fatal error.


One possible reason for a fatal error in this situation is if there is not enough memory available in the destination directory. The fatal error occurs when creating a new project if the destination directory has a minimal amount of space, but not enough to create the project. Because there is some space available at the initial check, Project Navigator does not capture the Out of Memory state and fails.

Check the available space in the location where the project is being created.Clear up additional space or use a different location if needed.

AR# 35503
Date Created 04/30/2010
Last Updated 12/15/2012
Status Active
Type General Article
  • ISE Design Suite - 12.1
  • ISE Design Suite - 12.2