UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 35865

12.1 SmartXplorer - LSF SmartXplorer passes hang after MAP and fail to run PAR

Description

I use the LSF feature of SmartXplorer. Since upgrading to ISE software 12.1, my LSF passes hang after MAP is complete and never start PAR. Is this a known issue?

Solution

This problem is an ISE softrware 12.1 regression and only affects SmartXplorer when the LSF feature is used. A patch is available for ISE software 12.1 and the problem will be fixed for ISE software 12.2.

Linux32

http://www.xilinx.com/txpatches/pub/swhelp/ise10_updates/35865_smartxplorer_121_lin.tar.gz

To install:
cd $XILINX
tar zxvf35865_smartxplorer_121_lin.tar.gz

Linux32

http://www.xilinx.com/txpatches/pub/swhelp/ise10_updates/35865_smartxplorer_121_lin64.tar.gz

To install:
cd $XILINX
tar zxvf35865_smartxplorer_121_lin64.tar.gz

AR# 35865
Date Created 05/28/2010
Last Updated 12/15/2012
Status Active
Type General Article
Devices
  • Spartan-3
  • Spartan-3 XA
  • Spartan-3A
  • More
  • Spartan-3A DSP
  • Spartan-3AN
  • Spartan-3E
  • Spartan-6 LX
  • Spartan-6 LXT
  • Virtex-5 FXT
  • Virtex-5 LX
  • Virtex-5 LXT
  • Virtex-5 SXT
  • Virtex-5 TXT
  • Virtex-5Q
  • Virtex-6 CXT
  • Virtex-6 HXT
  • Virtex-6 LX
  • Virtex-6 LXT
  • Virtex-6 SXT
  • Less
Tools
  • ISE Design Suite - 12.1